Howto: change andLinux network configuration

From andLinux

Revision as of 20:58, 21 April 2008 by Ludovic f (Talk | contribs)
Jump to: navigation, search

Contents

Abstract

andLinux is configured with two network interfaces by default, eth0 and eth1. The eth1 is used to communicate to the Windows host via the TAP-Colinux network interface.

The Windows interface is configured with ip address 192.168.11.1, and the Linux eth1 adapter is configured with 192.168.11.150. The TAP-Colinux interface operates as a router, so from the Windows host you can ping the eth1 interface and access the various network services you have configured.

What needs to be changed?

In order to change the network ip addresses you need to modify the following configuration items:

  • TAP-Colinux ip address and subnet
  • andLinux eth1 ip address and subnet
  • andLinux launcher registry configuration
  • andLinux /etc/profile configuration file

andLinux eth1 ip address configuration

lorem ipsum

andLinux /etc/profile configuration

lorem ipsum

TAP-Colinux ip address configuration

lorem ipsum

andLinux launcher configuration

lorem ipsum

Seen a page that contains spam or objectionable material? Please report the link and/or login of the author to david @ andLinux . org (remove spaces)