Howto: change andLinux network configuration

From andLinux

(Difference between revisions)
Jump to: navigation, search
Line 43: Line 43:
<p>After restarting andLinux your launcher will connect to the network services providing access to binary files.</p>

Revision as of 05:37, 22 April 2008



andLinux is configured with two network interfaces by default, eth0 and eth1. The eth1 is used to communicate to the Windows host via the TAP-Colinux network interface.

The Windows interface is configured with ip address, and the Linux eth1 adapter is configured with The TAP-Colinux interface operates as a router, so from the Windows host you can ping the eth1 interface and access the various network services you have configured.

What needs to be changed?

In order to change the network ip addresses you need to modify the following configuration items:

  • andLinux eth1 ip address and subnet
  • andLinux /etc/profile configuration file
  • TAP-Colinux ip address and subnet
  • andLinux launcher registry configuration


In this example we will change the network to be The Windows host will keep the host address 1, andLinux eth1 will retain the host id 150.

andLinux eth1 ip address configuration

The eth1 static ip configuration is stored in the '/etc/network/interfaces' config file. So we are going to edit this file to reflect the following information:

iface eth1 inet static

andLinux /etc/profile configuration

In order to ensure that the andLinux components interact properly with their Windows counterpart we need to edit the /etc/profile files content as shown here:

# set DISPLAY env variable
export DISPLAY=
export ESPEAKER=

TAP-Colinux ip address configuration

Change the TAP-Colinux network interface from to

andLinux launcher configuration

Add the following registry key, which is not present by default:



After restarting andLinux your launcher will connect to the network services providing access to binary files.

Seen a page that contains spam or objectionable material? Please report the link and/or login of the author to david @ andLinux . org (remove spaces)