Howto: access removable media from andLinux
Accessing removable media from andLinux using COFS
Having instant access to hot pluggable or removable media (such as USB sticks) on andLinux can be tricky. There is no direct way to do so from the UI and users typically have to edit fstab or other configuration files, with mixed success. In addition, automatic mounting is not fully supported and the mounted volume may no longer be accessible to Windows.
Fortunately, there is a solution to that, using Windows itself and the power of NTFS. Like Unix file systems, NTFS supports mount points, which allows a physical drive to be mounted inside an empty directory and its contents seamlessly displayed. This works for USB drives and CD/DVDs as long as the host drive is formatted with NTFS.
Here's how to mount a drive as a directory in Windows XP:
- Insert the external drive or media
- Open Control Panel/Administrative tools
- Open Computer Management
- Select Disk Management in the storage section
- Right-click the desired drive or partition
- Select "Change drive letter and path"
- Add a mount point to an empty NTFS folder
- If you want, you can now remove the drive letter in the previous dialog
andLinux/coLinux having mounted a NTFS partition as cofs will see these subdirectories as genuine NTFS folders. Any automatic volume mounting will be handled by Windows and will be transparent to Linux.
Other low level NTFS features that will show up in mounted cofs partitions are junction points and hard links, which are equivalent to directory symlinks and file hard links in Linux. These features are hidden from the standard UI but can be accessed with free third party tools like Alax.Info NTFS Links.
Accessing non-NTFS media
The directions above are the way to go if your media is NTFS but what if it isn't? The following instructions have been used successfully on Windows Vista.
Start a windows command line: cmd.exe and run diskpart.exe;
*** 1s Microsoft Windows [Version 6.0.6001] Copyright (c) 2006 Microsoft Corporation. All rights reserved. C:\>diskpart
Another window will open and you should see something like the following;
Microsoft DiskPart version 6.0.6001 Copyright (C) 1999-2007 Microsoft Corporation. On computer: XXXXX-VISTA DISKPART>
Use diskpart to determine the harddisk number and partition number.
First list all disks;
DISKPART> list disk Disk ### Status Size Free Dyn Gpt -------- ---------- ------- ------- --- --- Disk 0 Online 298 GB 0 B Disk 1 Online 75 GB 0 B
In this case the external disk is ~80GB so we need to list the partitions on "Disk 1", first we need to select it and then we can list the partitions;
DISKPART> select disk 1 Disk 1 is now the selected disk. DISKPART> list partition Partition ### Type Size Offset ------------- ---------------- ------- ------- Partition 1 Primary 71 GB 32 KB Partition 0 Extended 3153 MB 71 GB Partition 2 Logical 3153 MB 71 GB
We now have all the information we need to create device entry for the andLinux settings.txt file. The device to map is the first disk and the first partition, this translates to;
You may choose to have something like the following in your /etc/fstab;
/dev/hda1 /mnt/usb reiserfs rw,user